Do not connect to telecommunication networks or cable distribution systems.Do not connect to cables that are routed outside of a building.The device must only be connected to a Network Environment 0 per IEC TR62101.Do not use the USB and the Ethernet connector at the same time (unplug Ethernet while charging).Voltage and current requirement for charging and operation is 5V at 1A. Do not use strong or abrasive detergents when cleaning the device.Do not open or disassemble the device.Please refer all servicing to your distributor / retailer. Do not attempt to service this unit yourself.To prevent fire or shock hazard, avoid exposing this unit to rain or moisture.Please note that even when set to Off, the LED will still show you any flashing light or if it's solid purple or solid red. If you're using Mini Whole Home Wi-Fi, from the app's 'Settings' tab, select LED brightness, and then choose between Off or On. If you're using Whole Home Wi-Fi , from the app's 'Settings' tab, select LED brightness, and then choose between Off, Medium or High by tapping the appropriate setting. My LEDs are too bright on the discs, can I adjust them or turn them off? This also applies if you turn on the Guest Network, when the same Guest Network name (SSID) will be used for both 2.4GHz and 5GHz.
#Ethernet status color mac
A small handful of devices will list the discs separately as the discs have a different BSSID or MAC address. Within two minutes, follow the instructions on your device to connect.ĭoes Whole Home Wi-Fi show all discs as a single network?Īll discs for 2.4GHz and 5GHz use the same Network name (SSID), so most devices will see it as a single network.
Yes, on the rear of the case press the WPS Wi-Fi setup button for about one second. Wait until the disc has cooled down before turning back on.Ĭan I use the WPS button on my discs to connect my devices (laptop, smartphone and so on)? Press the power button on the back of the disc to switch the disc off. In the unlikely event that a disc gets too hot, it will turn off automatically. This device has been evaluated for and shown to be compliant with European Guidelines when installed and operated with a minimum distance of 20cm.There are no serviceable parts and opening them poses a risk of electrical shock Don’t attempt to open your devices or power adapters.Switch off your electrical socket if it's safe to do so and contact the BT helpdesk If your devices or power adapters appear damaged, stop using them immediately.Regularly check that objects don’t cover any parts or any vents that could cause overheating.Dust with a soft dry cloth - don’t use water or solvent.Designed for use at room temperatures between 0 and 40☌.Product may cause scratches or marks if placed on fragile surfaces (for example, veneered wood or delicate fabrics).Electronic devices hate liquids: don’t place devices and power adapters where it's damp or near sources of water or splashes.Contact the BT helpdesk if you need a replacement Only use power adapters provided by BT for this specific device.Keep cables out of young children's reach.Keep area ventilated (for example, don’t put in cupboards or behind sofas) and don’t block any vents with objects or thick carpets.
Position all parts, including power adapters, away from heat and sun (for example, away from radiators, window sills or other electrical equipment that can get hot).
0 kommentar(er)
